Down the hole hammer break out machine / Breakout Bench

Down the hole hammer break out machine / Breakout Bench
Down the hole hammer break out machine / Breakout Bench

Down the hole hammer break out machine portable for 3 -8 inch hammers. The threaded connections of the driver chuck and top sub may become very tightly tensioned during drilling. It is convenient to break the hammer threads on the rig, but if the threads cannot be loosened or tend to get stuck, a breakout bench is a solution. This handy but powerful breakout bench can easily be placed in a workshop or container and it breaks DTH hammers between 3'-8'. The breakout bench is delivered with wrench keys. 

Specifications :

1. For disassembling the DTH hammer

2. Easy operation 

3. Low cost 

4. Size: One for a 3-5' hammer, and another for a 6-8' hammer. 

5. CE certificate 

 

 

The operation method is as below: 

1). Put hammer on the bench. 

2). Adjust the position of the hammer and wrench; Use a wrench to block the top subside of the hammer; Let the wrench and jack in the same face. 

3). Fix a K-shaped base with a nut. 

4). Fix wrench with nuts. 

5). Shake handle of jack slowly till top sub away from the hammer. 

6). After the top sub is dismantled, grease the jack, release nuts, discharge the K-shaped base and turn around the hammer. 

7). Adjust the position of hammer and wrench; Use a wrench to block the drive chuck of the hammer; Let wrench and jack in the same face. 

8). Fix hammer 

9). Fix the K-shaped base and the wrench with nut. 

10). Shake handle of jack slowly till drive chuck away from the hammer.